Products
-
Anti-static steel raised access floor without edge (HDG)
The panel is made of high quality cold-rolled steel sheet. The bottom sheet is used ST14 stretched steel. Which are punched, spot-welded, coated with epoxy powder after being phosphoreted and infilled the foamed cement. The finish covered the HPL. PVC or others without edges. This panel is high capacity, easy installation, elegant appearance, fouling resistance, corrosion resistance, long using life, excellent waterproof and fireproof performance.
-
Anti-static steel raised access floor with edge (HDG)
The panel is made of high quality cold-rolled steel sheet. The bottom sheet is used ST14 stretched steel. Which are punched, spot-welded, coated with epoxy powder after being phosphoreted and infilled the foamed cement. The finish covered the HPL. PVC or others. The edges of panel are trimmed with 4 piece black PVC. This panel is high capacity, easy installation, elegant appearance, fouling resistance, corrosion resistance, long using life, excellent waterproof and fireproof performance.
All steel electrostatic floor without border
HDG600×600×35mm
-
OA-600 bare finish steel net work raised access floor
This raised floor is specially designed for easy cable layout in intelligent buildings. The outside of the raised floor is made of high-quality zinc cold steel sheet, the top and the bottom are both superiorly deep-stretching zinc cold steel sheet. Advanced spot welding technical structure is applied to the top and bottom of the raised floor, and in the middle is filled with lightweight cement of special ingredients developed by KEHUA. In this way, the finished products feature high loading capacity and durability. The surface of raised floor can be covered with various PVC or fabric carpets.
-
Anti-static Aluminum raised access floor (HDL)
The aluminium panel is made of high purity die-casting aluminium, the bottom have high-strength grids, the finished covered HPL, PVC or others. This product has light weight,high loading capacity, excellent electricconductive effect, Class A fire effect, Class A fire resistance, non-combustible, clean, low environmental pollution long using life and recycling resource.
-
Wood core raised access floor (HDM)
The panel is made of High-density particle board. Bottom is galvanized steel sheet / Aluminum sheet. Edge is 4 pcs black PVC trim along each side of the panel. Cover is HPL / PVC or others according to the customer’s requirement. This type flooring is as same as imported floor. This product technical performance is equivalent to the imported flooring products with a high loading capacity, high wear-resistant factor, light weight, low environmental pollution, foot feeling well, also have soundproofing, shockproof, fouling resistance, corrosion resistance, high wear resistance, effective pavement , long using life etc.
-
Wood core raised access floor panel with ceramic tile (HDMC)
The panel is made of high -density particle board. Bottom is galvanized steel shee / aluminium sheet. Edge is 4 pcs black PVCtrim along each side of panel. Cover is ceramic tile, marble or others according to the customer’s requirement. This type flooring is as same as imported floor. This product technical performance is equivalement to the imported flooring products with a high loading capacity, high-wear-resistant factor, light weight, low environmental pollution, foot feeling well, also have soundproofing, shockproof, fouling resistance, corrosion resistance, high wear resistance, effective pavement, long using life etc.
-
Calcium sulphate raised access floor with Ceramic tile (HDWc)
It is composed of surface layer, edge sealing, upper steel plate, filler, lower steel plate, beam and bracket. The edge seal is a conductive black tape (no edge seal on the floor). Surface layer: generally PVC, HPL or ceramic. Anti-static floor steel plate: high quality cold rolled steel plate, one stamping molding, high dimensional accuracy. Bottom steel plate: deep tensile cold rolled steel plate, bottom special pit structure, increase floor strength, multi-head spot welding, surface electrostatic painting treatment, corrosion and rust prevention.
-
Calcium sulphate raised access floor (HDW)
Calcium sulphate raised floor – Flame retardant, sound insulation, dustproof and wear resistance, super load-bearing and pressure resistant
Calcium sulfate anti-static floor is made of non-toxic and unbleached plant fiber as reinforcement material, combined with solidified calcium sulfate crystal, and made by pulse pressing process. Floor surface is made of HPL melamine, PVC, ceramic tile, carpet, marble or natural rubber veneer, plastic edge strip around the floor and galvanized steel plate at the bottom of the floor. Because of its environmental protection, fire prevention, high intensity, level off and so on a lot of respects superiority, already became the material that overhead floor family uses most extensively.
-
Anti-static steel raised access floor panel with ceramic tile (HDGc)
Ceramic anti-static raised floor Product specification: 600*600*40 600*600*45 Product introduction: all steel anti-static raised floor is made of high quality alloy cold rolled steel plate, after stretching, spot welding forming. After phosphating, the outer surface is treated with electrostatic spraying, the inner cavity is filled with standard cement, the upper surface is pasted with 10mm thick ceramic (bare board without veneer), and the conducting electrostatic edge strip is inlaid around.
-
Encapsulated Calcium sulphate raised access floor
The center adopts high strength calcium sulfate as the base material, the upper and lower are coated with galvanized steel plate and extended to the sides around, through the form of hook link, stamping, riveting form into a closed ring! Six sides of galvanized riveted sheet, four corners with or without corner keyhole, surface of popular science carpet, PVC or other materials; The bracket is molded with plastic pad on it, and the supporting structure around the beam or the supporting structure at the four corners can be used.
-
OA calcium sulphate Intelligent enhanced network raised access floor with stringer
This Product is widely applied to intelligent 5A office buildings, integrated office buildings ect, it has solved wiring requirements, especially high intensity and high height of building. at the same time for the upgrade of old building, ground engineering, using high density calcium sulphate or other materials, the floor panel is made of high quality top and bottom galvanized steel encasement. Four edges sealed with PVC edging strip and good sealing. Products with high loading capacity, waterproof, fireproof, good interchangeability. Floor surface fabric can be laid all kinds of PVC or square carpet, convenient installation, After laying on the floor, only need to gently lift the floor can lay and maintain all kinds of pipelines.
-
OA-500 bare finish steel net work raised access floor
This raised floor is specially designed for easy cable layout in intelligent buildings. The outside of the raised floor is made of high-quality zinc cold steel sheet, the top and the bottom are both superiorly deep-stretching zinc cold steel sheet. Advanced spot welding technical structure is applied to the top and bottom of the raised floor, and in the middle is filled with lightweight cement of special ingredients developed by KEHUA. In this way, the finished products feature high loading capacity and durability. The surface of raised floor can be covered with various PVC or fabric carpets.